Tuner/Tv Control Features; Tuning Mode; Direct Access Tuning - Kenwood KDC-X7006 Instruction Manual

Tuner/TV control features

ATT
Tuning
Selecting the station.
1
Select tuner source
Press the [SRC] button.
Select the "TUNER" display.
Refer to <Selecting the Source> (page 6).
2
Select the band
Push the Control knob towards [FM] or [AM].
Each time you push the knob toward [FM], it
switches between the FM1, FM2, and FM3 bands.
3
Tune up or down band
Push the Control knob towards [4] or [¢].
⁄
• During reception of stereo stations the "ST" indicator is
ON.
|
16
English
FNC 1 - 6
ST indicator
Band display Preset station number
Function icon
SRC Control knob
Frequency display

Tuning Mode

Choose the tuning mode.
Press the [AUTO] button.
Each time you press the button, the Tuning mode
alternates between the modes shown in the table
below.
Tuning mode Display
Auto seek "Seek Mode:Auto1" Automatic search for a station.
Preset station "Seek Mode:Auto2" Search in order of the stations in
seek
Manual "Seek Mode:Manual" Normal manual tuning control.
Function of remote control

Direct Access Tuning

Entering the frequency and tuning.
1
Select the band
Press the [FM] or [AM] button.
2
Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote
control.
"– – – –" is displayed.
AUTO/AME
FM
AM
Operation
the Preset memory.