4. Operation
4.2
Actions of Main Functional Components
4.2.1
Overview
• The Option Duplex is available as an optional unit for pagepro 4650EN/5650EN laser
printer. Duplex printing is enabled by mounting this optional unit to the rear side of the
base engine.
4.2.2
Duplex cover switch
• This switch detects that the duplex cover and rear cover are closed.
4.2.3
Transport sensor
• This sensor detects the presence or absence of paper in the duplex.
4.2.4
Cooling fan motor
• This fan vents air within the duplex and takes in outside air, to prevent abnormal temper-
ature rise in the duplex.
4.2.5
Transport roller
• This roll feeds the paper having the printed first surface back into the printer through the
duplex, to print on the second surface.
4.2.6
AD control board
• A CPU is installed in the AD control board. This CPU receives instructions from PRCB
and from sensors and switches, and controls feeding operation in the AD control board.
• A flash ROM is used with the CPU installed in the AD control board, so that the firmware
can be rewritten through communications.
4.2.7
Transport motor
• This motor gives the driving force the three Transport rollers, which transport the paper
into the printer.
6
Theory of operation Ver. 1.0 Nov. 2007