Display Setting - Kenwood KDC-W707 Instruction Manual

Display Setting

Changing the display mode.
1
Enter display Control mode
Press the Control knob for at least 1 second.
"Display Control" is displayed.
2
Select the Display mode
Press the Control knob.
Each time you press the knob, the display
alternates between the display modes shown in
the table below.
Display Mode Display
"Display Type A" 5
"Display Type B"
5
"Display Type C"
1 Upper text display part
2 Middle text display part
3 Lower text display part
4 Text display part
5 Graphic display part
• You can display the information that will be shown
in the Upper text display part, the Lower text display
part or the Level meter display part according to the
setting of Display mode. Refer to the following pages
for how to select the mode.
Display Type A
Upper 1
—
Middle 2
—
Lower 3
—
Text 4
—
Graphic 5
page 18
3
Exit Display Control mode
Press the Control knob for at least 1 second.
4
1
2
3
B C
— page 15
—
page 15
—
page 15
—
page 14
—
page 18
13
|
English