Changing Language for PTY Function Music disc/Audio file Operation Folder Select Menu Operation Menu System Manual Clock Adjustment Auxiliary Input Display Setting Demonstration mode Setting KDC-W237S Appendix Accessories/ Installation Procedure 14 Connecting Wires to Terminals Installation/Removing the Unit Troubleshooting Guide Specifications...
• If you experience problems during installation, consult your Kenwood dealer. • When you purchase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area. • The characters which can be displayed by this unit are A-Z 0-9 @ "...
Also avoid places with too much dust or the possibility of water splashing. • To prevent deterioration, do not touch the terminals of the unit or faceplate with your fingers. KDC-W237S Disc slot Control knob Auxiliary input Connect a portable audio device with mini-plug cable (3.5 ø).
Tuner functions Band select Control knob Switches between FM1, FM2, and FM3 each time the top side is pressed. Switches to AM when the bottom side is pressed. Tuning Control knob Changes the frequency when the left or right side is pressed.
Adjust the Audio item Turn the [VOL] knob. Exit Audio Control mode Press any button. Press a button other than the [VOL] knob. KDC-W237S Audio Setup Setting the Sound system. Select the source to adjust Press the [SRC] button. Enter Audio Setup mode Press the [VOL] knob for at least 1 second.
Speaker Setting Fine-tuning so that the System Q value is optimal when setting the speaker type. Enter Standby Press the [SRC] button. Select the “STANDBY” display. Enter Speaker Setting mode Press the [VOL] knob. Select the Speaker type Turn the [VOL] knob. Speaker type Display “SP OFF”...
• Speech and Music include the Program type shown below. Music: No.12 — 17, 26 — 30 KDC-W237S Speech: No.3 — 11, 18 — 25, 31 Search for the selected Program Type station Press the right or left side of the Control knob.
Music disc/Audio fi le Operation Function of Audio file Folder Select Quickly selecting the folder you want to hear. Enter Folder Select mode Press the [5] button. “FLD SEL” is displayed. Displays the current folder name. Select the folder Operation type Operation Movement between folders Press the right or left side of the Control knob.
Specifies whether the text is MANU* scrolled automatically. “AUX” OFF/ON1*/ Sets whether to display AUX during source selection. KDC-W237S Display Setting Setting overview “OFF” OFF – 60M Turns off the power when the preset time has lapsed in the Standby mode.
⁄ • You can do this adjustment when the “SYNC” is set as “OFF”. Auxiliary Input Display Setting Selecting the display when changing to Auxiliary input source. Select Auxiliary input source Press the [SRC] button. Select the “AUX” display. Enter Menu mode Press the [B.BOOST] button for at least 1 second.
: Audio fi Audio file An online manual about audio files is put on the site, www.kenwood.com/audiofile/. On this online manual, detailed information and notes which are not written in this manual are provided. Make sure to read through the online manual as well.
• AUTO1, AUTO2, MANUAL (Tuning mode select) Select a tuning mode of the radio. Tuning mode Display Operation Auto seek “AUTO 1” Automatic search for a station. Preset station seek “AUTO 2” Search in order of the stations in the Preset memory.
(i.e., it will not turn on and off along with the ignition). If you want to link the unit’s power KDC-W237S with the ignition, connect the ignition wire to a power source that can be turned on and off with the ignition key.
Connect to the terminal that is grounded when either the telephone rings or during conversation. MUTE ⁄ To connect the Kenwood navigation system, consult your navigation manual. Connect either to the power control terminal when using the optional power amplifier, or to the P.CONT...
Page 16
Gray Gray/Black White White/Black Green Green/Black KDC-W237S 2WARNING Functions Connecting the ISO Connector The pin arrangement for the ISO connectors depends on the type of vehicle you drive. Make sure to make the proper connections to prevent damage to the unit.
Installation/Removing the Unit Installation Metal mounting strap (commercially available) Firewall or metal support Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. Self-tapping screw (commercially available) Screw (M4X8) (commercially available) ⁄ •...
☞ Clean the media, referring to the CD cleaning of the section on <Handling CDs> (page 3). ✔ The recording condition is bad. ☞ Record the media again or use another media. KDC-W237S The messages shown below display your systems condition. TOC ERR: •...