External Audio Sources; Technical Data - Blaupunkt Casablanca CD51 Operating Instructions Manual

EXTERNAL AUDIO SOURCES

External audio sources
In addition to the CD changer, you can
also attach other external audio sourc-
es that have a line output, for instance,
portable CD players, MiniDisc players
or MP3 players.
If no CD changer is connected, you can
connect two external audio sources.
The AUX input must be activated in the
menu.
If you want to connect an external au-
dio source, you will need an adapter
cable. You can obtain this adapter cable
from your authorized Blaupunkt dealer.
Switching the AUX input on/off
Press the MENU button 8.
"MENU" appears in the display.
Keep pressing the
til "AUX-IN-1 OFF" or "AUX-IN-1
ON" appears in the display.
In this case, "1" stands for the first AUX
input. A "2" stands for the second AUX
input. If a CD changer is connected, only
input "2" can be selected.
Press the or
switch AUX on/off.
When you have finished making
your changes, press the MENU 8
or OK ; button.
Note:
If the AUX input is switched on it can be
selected by pressing the CD•C button
@.
button : un-
button : to

TECHNICAL DATA

Technical data
Amplifier
Output power:
Tuner
Frequency ranges:
FM :
AM :
FM Mono - Sensitivity:
FM frequency response:
CD
Signal to noise ratio:
Frequency response:
Pre-amp out
4 channels:
Input sensitivity:
AUX 1 input:
AUX 2 input:
Tel./Nav. input:
Subject to changes!
4 x 25 watts sine
in accordance
with DIN 45 324
at 14.4 V
4 x 50 watts max.
power
87.5 – 107.9 MHz
530 – 1710 kHz
7.8 dBf
20 - 16,000 Hz
96 dB
20 - 20,000 Hz
4 V
2 V/ 6 kΩ
775 mV/ 10 kΩ
10 V/ 560 Ω
25