Menu Operation; Menu System; Activating Security Code - Kenwood KDC-138 Instruction Manual

Menu Operation

Menu System

Setting various functions.
1
Enter Menu mode
Press the [B.BOOST] button for at least 1
second.
"MENU"/ "MEnU" is displayed.
2
Select the menu item
Press the top or bottom side of the Control
knob.
KDC-MP238/MP238CR/MP208
Display Setting Setting overview
"CODE SET"/ Refer to Sets/Resets security code.
"CODE CLR" page 10/11 (Function of KDC-MP238)
"CLK ADJ" Refer to Sets the clock.
page 11
"DIM" ON/OFF* Adjusts the brightness of
the display according to the
surrounding illumination.
"SWPRE" R*/ SW Sets the preout output.
"SPRM" ON*/OFF Turns ON/OFF the Supreme
function.
"CRSC" OFF/ON* Switches to Monaural to decrease
noise when reception is poor.
"NAME SET" Refer to Sets the display when switched
page 12 to AUX source.
"SCL" AUTO*/ Specifies whether the text is
MANU scrolled automatically.
"HDR MODE" Refer to Sets the receive mode of HR radio.
page 12 (Function of KDC-MP238)
"AUX" OFF/ON1*/ Sets whether to display AUX
ON2 during source selection.
"CD READ" 1*/2 Sets the CD read mode.
"DEMO" Refer to Specifies whether to enable
page 12 demonstration.
KDC-138/138CR
Display Setting Setting overview
"CLCK" Refer to Sets the clock.
page 11
"REAR"/ REAR*/SUB Sets the preout output.
"SUB" (Function of KDC-138)
"CRSC" On*/OFF Switches to Monaural to decrease
noise when reception is poor.
"AUH" OFF/On* Sets whether to display AUX
during source selection.
*Factory setting
: Can be set in standby state.
: Can be set while Audio file source.
10
|
KDC-MP238/CR/KDC-MP208/KDC-138/CR
: Can be set during FM reception.
: Can be set while accessing AUX source.
: Can be set while HD Radio source.
⁄
• Refer to the respective page for information on how to
set the items with reference page number.
• Refer to the <Appendix> (page 14) for the details of the
menu items.
3
Set the menu item
Press the right or left side of the Control knob.
4
Exit Menu mode
Press the [B.BOOST] button.
Source
Function of KDC-MP238

Activating Security Code

When Security Code is set, possibility of theft
is reduced because input of Security Code is
prompted to turn on the unit once it is turned off.
⁄
• You can set the Security Code with a 4 digit number of your
choice.
• The Security Code cannot be displayed or referenced. Make
a note of the Security Code and treasure it up.
1
Enter Standby
Press the [SRC] button.
Select the "STANDBY" display.
2
Enter Menu mode
Press the [B.BOOST] button for at least 1
second.
When "MENU" is displayed, "CODE SET" is also
displayed.
3
Enter Security Code mode
Press the center of the control knob for at least
1 second.
Source
When "ENTER" is displayed, "CODE" is also displayed.
4
Select the digits to enter
Press the right or left side of the Control knob.
5
Select the Security Code numbers
Press the top or bottom side of the Control
knob.
6
Repeat steps 4 and 5, and complete the
Security Code.
7
Confirm the Security Code
Press the center of the Control knob for at least