Table of Contents
Advertisement
Menu Operation
Menu System
Setting various functions.
1
Enter Menu mode
Press the Search button for at least 1 second.
"MENU" is displayed.
2
Select the menu item
Press the [FM+] or [AM–] button.
Display
Setting
Setting overview
"CODE SET"/
Refer to
Sets/Resets security code.
"CODE CLR"
page 10/11
(Function of KDC-MP443)
"DIM"
ON/OFF*
Adjusts the brightness of
the display according to the
surrounding illumination.
"ICON"
ON1/ON2*/
Sets the Graphics mode of the
OFF
display.
"SWPRE"
R*/ SW
Sets the preout output.
"SPRM"
ON*/OFF
Turns ON/OFF the Supreme
function.
1
"LO.S"*
ON/OFF*
Only stations whose reception is
good are searched in auto seek
tuning.
"AUTO1"/
Selects the tuning mode of
AUTO1*/
"AUTO2"/
the radio.
AUTO2/
"MANUAL"
MANUAL
"CRSC"
OFF/ON*
Switches to Monaural to decrease
noise when reception is poor.
"NAME SET" Refer to
Sets the display when switched
page 11
to AUX source.
"SCL"
AUTO*/
Specifies whether the text is
MANU
scrolled automatically.
"AUX"
OFF/ON1*/
Sets whether to display AUX
ON2
during source selection.
"CD READ"
1*/2
Sets the CD read mode.
"DEMO"
Refer to
Specifies whether to enable
page 12
demonstration.
*Factory setting
*
1
Function of KDC-MP243SW
Displayed item is depending on currently selected
source. The mark in Source column shows the
source to which the item is displayed.
: Can be set in other than standby state.
: Can be set in standby state.
: Can be set while Audio file source.
: Can be set while Tuner source.
: Can be set during FM reception.
: Can be set during AM reception.
: Can be set while accessing AUX source.
— : Can be set during all sources.
10
|
KDC-MP443/KDC-MP3043/KDC-MP343/KDC-MP243/KDC-MP243SW
⁄
• Refer to the respective page for information on how to
set the items with reference page number.
• Refer to the <Appendix> (page 14) for the details of the
menu items.
3
Set the menu item
Press the [4] or [¢] button.
4
Exit Menu mode
Source
Press the Search button.
—
Function of KDC-MP443
Activating Security Code
When Security Code is set, possibility of theft
is reduced because input of Security Code is
prompted to turn on the unit once it is turned off.
⁄
• You can set the Security Code with a 4 digit number of your
choice.
• The Security Code cannot be displayed or referenced. Make
a note of the Security Code and treasure it up.
1
Enter Standby
Press the [SRC] button.
Select the "STANDBY" display.
2
Enter Menu mode
Press the Search button for at least 1 second.
—
When "MENU" is displayed, "CODE SET" is also
displayed.
3
Enter Security Code mode
Press the [AUD] knob for at least 1 second.
When "ENTER" is displayed, "CODE" is also displayed.
—
4
Select the digits to enter
Press the [4] or [¢] button.
5
Select the Security Code numbers
Press the [FM+] or [AM–] button.
6
Repeat steps 4 and 5, and complete the
Security Code.
7
Confirm the Security Code
Press the [AUD] knob for at least 3 seconds.
When "RE-ENTER" is displayed, "CODE" is also
displayed.
8
Do the step 4 through 7 operation, and reenter
the Security Code.
"APPROVED" is displayed.
The Security Code function activates.
Hide quick links:
Advertisement
Table of Contents
