Utax CLP 3721 Instruction Manual page 61

General Information
This chapter provides the information you need to configure the Ecosys
Color printer. In general you need to use the operation panel only to make
default settings. You can make most changes to the printer settings using
the printing system driver through the application software.
Note Changes to printer settings made using a software
application override changes made using the operation panel.
You can also access the printer's various settings from a remote location,
by using the control panel, the printing system driver or other utilities such
such as Status Monitor Utility. Other printer utilities can be installed using
the CD-ROM supplied with the printer.
The chapter describes the operation panel in detail, including its menus
and the procedures for changing various printer settings.
4-2
Using the Operation Panel