Maintaining The Automatic Ice Maker - Mitsubishi Electric MR-G50J Operating Instructions Manual

Table of Contents

Advertisement

Maintaining the Automatic Ice Maker

■ Regular cleaning produces clean and delicious ice.
■ Regular cleaning prevents water stains, molding, etc.
Cleaning once a week
Water tank
Remove the cover and
wash with water
(the tank can withstand up to
approximately 60°C)
Cleaning once a month
Water supply pipe / Tank holder
1
Pull out water supply pipe. Wipe
the tank holder with clean cloth.
Water supply pipe
● Do not let water flow into the tank holder.
2
Separate pieces and wash with water.
Packing
● Twist on the aluminum pipe to replace it.
3
Reverse steps to replace the pipe.
Side A
Side B
Note
Be sure to fit the pipe securely to the
water tank. Make sure that no foreign
object is found between the water
supply pipe and the pipe junction.
Improper fitting or any foreign object
will produce a clearance between the
pipe and the pipe junction to cause
freezing of the water tank.
Follow the notes shown at right.
20
Tank holder
Aluminum pipe
Water supply pipe
● Replace the water supply
pipe. Be sure that sides A and
B fit flush against each other.
● Align the ▲ marks on
the pipe and the water
tank.
▲ mark
Cleaning once a month
Water supply pump / Light-type bacteria removing filter
1
Pull out the pipe.
Water tank
2
Twist the pump to remove it.
Water supply pump
3
Pull out the pipe. Twist the cap to
remove it. Take out the impeller
and wash parts with water.
● The impeller is
magnetic. Wash
carefully to remove
all foreign objects.
Light-type bacteria removing filter
4
Remove the light-type bacteria
removing filter and wash with water.
Normally the filter need not be replaced.
However, replace it in the following conditions:
● When the filter is clogged by passing something
other than water through the filter.
● When the filter is broken.
In such cases, contact the dealer that you
purchased this refrigerator.
5
Reverse the steps to replace the pump.
● Improper reassembling might cause failed ice
making or increased noise.
● Insert the pipe horizontally into
Water tank
Be careful not to
pinch any
Pipe
foreign object.
Water tank
Pipe
Pipe
Impeller
Cap
the water tank.
Pipe junction
Water tank
Insert horizontally
Tank holder
(on the refrigerator body)
Cover
Pipe

Advertisement

Table of Contents
loading

Table of Contents