Automatic Ice-Maker 9 - 1 - Mitsubishi Electric MR-CGX41EN Operating Instructions Manual

Automatic Ice-Maker Automatic Ice-Maker
You can make ice cubes by puting water in the water supply tank of the
refrigerator compartment. Please do periodically maintain to make a good ice cube
by cleaning. Please drain the water in the water supply tank when you do not make ice.
Water supply Tank
Approx. 1.1 L.
Tank Plug
Tank Lid
Purification Filter
Pipe
Water Supply Pump
Water Supply Pipe
How to
make ice
WARNING
Fill with potable
water only.
Water to Use for Your Auto Ice-Maker.
We recommend that you use water such as tap
water which contains less bacteria.
If you use mineral water or water from a filtering machine,
please increase the number of cleaning times, and be sure
to clean it thoroughly.
Take out the water supply
tank, remove the tank plug,
and fill with water.
Put the tank plug on the water supply
tank, carry carefully without tilting it,
and return to its original position.
When carrying the water supply tank, make sure
●
that the " " symbol is in the closed position.
If the tank is tilted, water will spill out.
●
If the water supply tank is not properly in position,
●
ice cannot be made. Make sure that there is
nothing blocking the tank receiving area.
About the first batches of ice.
Please discard the first 2 - 3 batches of ice
(approx. 30 cubes) made at the very beginning.
Also, discard ice that isn't used in over 1 week.
There may be times when there may be dust
or an odor on them.
Ice-Maker Tray (i n freezer compartment)
(Do not remove.)
Noise Reduction Mat
Reduces noise of dropping ice
Do not remove.
Ice Storage Box
Page 13
➡
How to remove the tank plug.
Turn to the "Open" position and lift off.
Fill water to the
"full line" mark.
How to put in the tank plug.
Ice Server
Tank plug
OPEN
CLOSED
Tank plug
OPEN
CLOSED
9