Table of Contents
Advertisement
Removing and Maintaining the Accessories
Reverse removal procedures to reinstall accessories.
Before you start
Remove the power plug from the socket
Wait at least 10 minutes before you replace the power plug. The refrigerator
will not operate if the plug is replaced immediately after it is removed.
Maintenance and Cleaning
● Wipe or remove and wash parts with water.
● To remove oily deposits, wet a cloth with warm
water or dishwashing detergent and wipe.
● Be sure to wipe off any detergent you used.
● Be sure to read all instructions
and heed precautions for chemically treated
disposable cloths you use to clean parts.
● Do not use alcohol, benzene, steel wool
or alkaline-base detergents. They will
cause damage to plastic parts and coating.
● Be sure to wipe off all oily deposits. (Oily deposits
can cause plastic parts to break.)
Height adjustable shelf
1 Lift up the back part of
the self, take off the
hook.
2 Pull it out toward you.
Three-way and two-way flexishelf
Three-way flexishelf
Push the shelf inward
and lift.
Two-way flexishelf
Push the shelf inward,
then lift and pull forward.
Drain pan
1 Remove the toe
grille by pressing
the left and right
sides inward while
pulling forward.
2 Hold the drain pan
with two hands and
pull out gently.
22
Warning
Failure to remove the plug
may result in electric shock.
Drain pan Toe grille
Vegetable and Freezer Compartment
Sliding case
Freezing case (upper)
1 Open the door all
the way.
2 Pull up and lift the
case toward you.
How to remove the door
4 Pull out the door holding slide rails
(upper/lower).
※ Please take care not to be injured by
the metal edge and gap of rails.
Vegetable case
Freezing case (lower)
3 Pull up and lift the
case toward you.
Slide rail (upper)
Slide rail (lower)
Advertisement
Table of Contents
