System connections
Make connections as shown below.
When connecting the related system components, refer
6
also to the instruction manuals of the related components.
Do not plug in the power lead until all connections are com-
pleted.
Be sure to use this unit placed on a level surface.
Audio cord
1. Connect all cords firmly. If connections are loose there could be loss of sound or noise produced.
Notes
Notes
2. When plugging and unplugging connection cords, be sure to first remove the power cord from the AC outlet. Plugging/unplugging
connection cords without removal of the power cord can cause malfunctions or damage to the unit.
OUTPUT
L
SL16 XS 8
R
SL 16/XS8 switch
System control cord
SYSTEM CONTROL
L
R
CD
Digital amplifier or receiver, etc.
Malfunction of microcomputer
If operation is not possible or erroneous display
appears even though all connections have been
made properly, reset the microcomputer refer-
ring to "In case of difficulty".
Optical connection
(Except for the U.S.A., U.S. Military and Canada)
Optical fiber cable (Commercially-available)
DIGITAL
OUT
OPTICAL
SYSTEM
CONTROL
7
System connections
CD-224M/DPF-J5010 (En)
⁄
To OPTICAL terminals
like receiver, MD, DAT,
etc.
Remove the protection cap
when using the DIGITAL
OUTPUT (OPTICAL) jack.
To wall AC
outlet