To Change Or Delete A Title Name - Kenwood DPF-J5010 Instruction Manual

22
Preparation
÷ Close the door panel.

To change or delete a title name

1
Perform steps 1 and 2 of "Assigning Title
Names".
2
Change or delete characters one by one.
1 Select overwrite or insert mode.
Change
2 Move the cursor to the desired char-
acter (to be changed).
3 Select a character.
Press until the character to be entered
comes to the position of the flashing
cursor.
4 Set the selected character.
1 Move the cursor to the desired char-
Deletion
acter (to be deleted).
2 Press the DELETE key.
0
)
£
INSERT
1 ¡
CURSOR
L R
CHARACTER/SEARCH
4 ¢
DOWN UP
SET
1 ¡
CURSOR
L R
DELETE/
CLEAR
: Keys and controls used in the operations described on this page.
÷ Call the disc to be changed.
÷ Deletion mode is cancelled when the MODE key is pressed.
S O N E B O D
+ Move with the 1 ¡ keys =
÷ If the title to be changed is too long to be displayed on the display
section, press the 1 or ¡ key to scroll the display so that the
characters hidden until then appear.
S O N E B O D
÷ The characters also can be selected with the DISC SKIP knob on the
main unit. Turn the knob until the character to be entered comes to the
position of the flashing cursor.
÷ When a title name is to be deleted, delete all characters one by one.
Registration of Title Name
CD-224M/DPF-J5010 (En)
= >
Z B A C
Y C T
= >
Y C T L N M O
Flashing cursor