To Check The Edited Contents; Playing Or Recording The Edited Contents; To Clear The Edited Contents - Kenwood D-R350 Instruction Manual

The CD contents are edited as follows.
(1) The tape recording time input is divided by two, and tracks that can
be accommodated in file A (which refers to tracks on tape side A) are
selected in order of their track Nos.
(2) In a few seconds, the time left on tape side A is displayed, then file
B (tracks on tape side B) is edited in the same manner.
1. While you can edit with a different time setting to that of the tape you are using, part of the tape may be left with nothing recorded on it, or
the last track on side A or side B may be cut short.
Notes Notes
2. The EDIT function may not operate properly for discs having only one track or having tracks of long duration such as classical music.

To check the edited contents

RC operation
CHECK

Playing or recording the edited contents

RC operation
6

To clear the edited contents

RC operation
Press any one of these keys.
P.MODE
CLEAR
Main unit operation
0
Do this operation in the stop mode.
Remote control unit only
GRC operation
Check
ENTER
GRC operation
Return
ENTER
ENTER
GRC operation
P.mode
ENTER
Clear
ENTER
Editing in the FILE A
E D I T A 01
The selected track numbers are displayed in sequence.
E D I T A
E D I T A 01
÷ When the CHECK key is pressed, track numbers and remaining time
in the file A are displayed first, then those in the file B.
Press the 6 key to start playback according to the edited
content. The playback pauses at the beginning of the track
Note Note
edited for tape side B. Press the 6 key again to continue
playback.
When recording the edited content onto a tape, it is recommended
to use the synchro recording or CCRS recording function of
KENWOOD cassette decks.
÷ For details, see the instruction manual of the cassette deck.
÷ The edited data is cleared entirely.
Editing
D-R350 (En)
- 1 : 3 2
Remaining time display.
21