To Check The Edited Contents; Playing Or Recording The Edited Contents; To Clear The Edited Contents - Kenwood DP-R7090 Instruction Manual

To check the edited contents

REMOTE CONTROL UNIT
RC-P0601

Playing or recording the edited contents

REMOTE CONTROL UNIT
RC-P0601

To clear the edited contents

REMOTE CONTROL UNIT
RC-P0601
1. While you can edit with a different time setting to that of the tape you are using, part of the tape may be left with nothing recorded on it, or
the last track on side A or side B may be cut short.
Notes Notes
2. The EDIT function may not operate properly for discs having only one track or having tracks of long duration such as classical music.
Downloaded From DvDPlayer-Manual.com Kenwood Manuals
CHECK
6
Press any one of these keys.
P.MODE CLEAR
0
Do this operation in the stop mode.
REMOTE CONTROL UNIT
RC-P0601
: Keys and control used in the operations described on this page.
E D I T A 01
÷ When the CHECK key is pressed, track numbers and remaining time
in the file A are displayed first, then those in the file B.
Press the 6 key to start playback according to the edited
content. The playback pauses at the beginning of the track
Note Note
edited for tape side B. Press the 6 key again to continue
playback.
When recording the edited content onto a tape, it is recommended
to use the synchro recording or CCRS recording function of
KENWOOD cassette decks.
÷ Do not adjust the output level from this unit particularly during record-
ing.
÷ For details, see the instruction manual of the cassette deck.
÷ The edited data is cleared entirely.
DP-R7090/R6090 (En)
19