Alto FM-1500HD Operator's Manual page 30

This Clarke Technology Industrial/Commercial Floor Product is warranted to be free from defects in materials
and workmanship under normal use and service for a period of five years from the date of purchase, when oper-
ated and maintained in accordance with Clarke Technology's Maintenance and Operations Instructions.
The motor and gear unit of this product is warranted to be free from defects in materials and workmanship
for an additional two years for a total of seven years from the date of purchase, provided it is inspected and
cleaned at one-year intervals by an authorized Clarke Technology repair station. Cost of the inspection and
cleaning is the responsibility of the purchaser. Failure to comply with the annual inspection and cleaning require-
ment will void the additional two years warranty on the motor and gear unit. In the event of a warranty claim on the
motor and gear unit, proof of inspection and cleaning must be provided.
Clarke Technology's liability under this warranty is limited to repair of the product and/or replacement of parts
and is given to purchaser in lieu of all other remedies, including INCIDENTAL AND CONSEQUENTIAL DAM-
AGES.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE SPECIFIED HEREIN, THERE ARE NO
WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION OF THE FACE HEREOF. NO WARRANTIES,
INCLUDING BUT NOT LIMITED TO WARRANTY OF MERCHANTABILITY, SHALL BE IMPLIED. A warranty
registration card is provided with your Clarke Technology floor machine. Return the card to assist Clarke Technol-
ogy in providing the performance you expect from your new floor machine.
If a difficulty develops with the product, you should: (a) Contact the nearest authorized Clarke Technology repair
location or contact the Clarke Technology Service Operations Department, 2100 Highway 265, Springdale Arkan-
sas 72764, for the nearest authorized Clarke Technology repair location. Only these locations are authorized to
make repairs to the product under this warranty. (b) Return the product to the nearest Clarke Technology repair
location. Transportation charges to and from the repair location must be prepaid by the purchaser. Clarke Technol-
ogy will repair the product and/or replace any defective parts without charge within a reasonable time after receipt
of the product.
ALTO U.S. INC., 2100 Highway 265, Springdale, Arkansas 72764
CLARKE TECHNOLOGY reserves the right to make changes or improvements
Always use genuine Clarke Technology Parts for repair.
CLARKE TECHNOLOGY U.S. WARRANTY
to its machine without notice.
CLARKE TECHNOLOGY
2100 Highway 265
Springdale, Arkansas, 72764