Aastra MBU 400 Administrator's Manual page 23

Hide thumbs Also See for MBU 400:

Table of Contents

Factory Default Access Codes

Factory Default Web Username and Password

Aastra MBU 400 Administrator Guide

2. Click

All settings on this page are reset to default values. The MBU 400 then saves the

settings and resets automatically.

Note: All account settings will be lost and need to be re-entered before VoIP calls

can be made. The handset access codes will not be reset, and need to be changed to

match the default gateway access code of "0000".

Factory Defaulting from the Base Unit

• Factory default the MBU by holding the

all the LEDs comes on) then releasing the switch.

After factory defaulting the MBU, handsets may need to be re-registered. See the

Aastra MBU 400 User Guide for further handset registration information.

A factory default reset will change the access code on the gateway to "0000" but the

handset access codes will not change. You must manually reset the handset activation

code on each handset to "0000" using

See the Aastra MBU 400 User Guide for further handset information.

Code

Handset.

A factory default reset will change the WEB UI username and password back to the

original settings of "admin" and "22222", unless changed by a subsequent

configuration file transfer.

to return all settings to the default values.

switch for about 15 seconds (until

RESET

Settings

System Settings

Access

Table of Contents