Restoring Data - Epson Discproducer PP-100N Administrator's Manual

Restoring data

Use the following procedure to restore a backup file created in "Backing up data" on page 65 of this guide.
• If you perform a restoration, the restored data overwrites configuration data other than
the network configuration information and maintenance information, and overwrites
the job history.
• A backup file of a different Publish Mode cannot be restored.
1 Log in to EPSON Total Disc Net Administrator.
See "Logging In to EPSON Total Disc Net Administrator" in the PP-100N User's Guide for the login procedure.
2
Click the [Data] tab on the [Maintenance] screen.
3
Click [Browse] to specify the backup file, and click [Restore].
4
Click [OK].
The BUSY LED flashes, and the restoration begins.
When the BUSY LED goes out, the restoration is finished.
Maintaining Your Product
67