Ford 2010 Milan Owner's Manual page 307

Maintenance and Specifications
2. Carefully separate the two halves of the air filter housing.
• 2.5L I4 engine
• 3.0L V6 Duratec engine
3. Remove the air filter element from the air filter housing.
4. Wipe the air filter housing and cover clean to remove any dirt or
debris and to ensure good sealing.
5. Install a new air filter element. Be careful not to crimp the filter
element edges between the air filter housing and cover. This could cause
filter damage and allow unfiltered air to enter the engine if not properly
seated.
6. Replace the air filter housing cover and secure the clamps. Be sure
that the air cleaner cover tabs are engaged into the slots of the air
cleaner housing.
307
2010 Milan (mln)
Owners Guide, 1st Printing
USA (fus)