Selling Point Descriptions - Hitachi CJ 65S3 Technical Data And Service Manual

4-1. Selling Point Descriptions

(1) Higher cutting capacity
The Models CJ 65S3 and CJ 65V3 can cut wood workpieces up to 65 mm in thickness in the same manner as
7-inch circular saws. They are convenient because each model can be widely used for home-use applications
that do not require a circular saw level cutting speed, such as curved cutting (used as a jig saw) and cutting of
thick workpieces.
(2) Nonskid large soft grip
Most of the conventional soft grips cover only the handle. The Models CJ 65S3/CJ 65V3 are equipped with
the nonskid grip that largely covers both the handle and the housing (front side) to prevent slipping even if the
operator holds the Models CJ 65S3/CJ 65V3 in various ways.
(3) Large-trigger switch for more convenient operation
Adoption of a large trigger switch (room enough for two fingers) ensures easier triggering for improved control
and operation.
(4) Nozzle for connection with dust collector (standard accessory)
The Models CJ 65S3 and CJ 65V3 are connectable to the Hitachi Koki's dust collector through the standard
connection nozzle without use of any optional accessory for cutting operation in a clean environment.
Adapting mouth
for dust collector
(5) Trigger switch with speed control dial (Model CJ 65V3 only)
The Model CJ 65V3 has the trigger switch with speed control dial. The triggering amount can be adjusted to
keep at a speed suitable for each job.
(6) Guard bar for safety
The guard bar prevents contact of the operator's fingers with the blade.
Connection to dust collector
Adapter
Hose
Stopper
High speed
Speed control dial
Low speed
--- 2 ---
Dust collector
Switch