Connecting Component Input - NEC PA622U User Manual

Connecting Component Input

15-pin - to - RCA (female) × 3
cable adapter (ADP-CV1E)
Component video RCA × 3 cable (not
supplied)
• Select the source name for its appropriate input connector after turning on the projector.
Input connector
COMPUTER IN
BNC IN
NOTE:
• When the signal format is set to [AUTO] (default factory setting when shipped), the computer signal and component signal are
automatically distinguished and switched. If the signals cannot be distinguished, select [COMPONENT] under [ADJUST] →
[VIDEO] → [SIGNAL TYPE] in the on-screen menu of the projector.
• To connect to a video device with a D connector, use the sold separately D connector converter adapter (model ADP-DT1E).
COMPUTER IN
Blu-ray player
INPUT button on the projector
cabinet
7:COMPUTER
4:BNC
6. Installation and Connections
AUDIO IN
AUDIO IN
BNC (male) - to - RCA (male) conversion cable × 3
(sold commercially)
Stereo mini plug - to - RCA audio cable (not
supplied)
Audio Equipment
Button on the remote control
7/COMPUTER
163
4/BNC