Connect The Projector To A Lan - NEC PA622U User Manual

Connect the projector to a LAN.

Connect the projector to the LAN by following the instructions in "Connecting to a Wired LAN" (→ page 169) and "9.
Controlling the Projector by Using an HTTP Browser" (→ page 44)
Start Virtual Remote Tool
Start using the shortcut icon
• Double-click the shortcut icon
Start from the Start menu
• Click [Start] → [All Programs] or [Programs] → [NEC Projector User Supportware] → [Virtual Remote Tool]
→ [Virtual Remote Tool].
When Virtual Remote Tool starts for the first time, "Easy Setup" window will be displayed.
The "Easy Setup" feature is not available on this model. Click "Close Easy Setup".
Closing the "Easy Setup" window will display the "Projector List" window.
Select your projector you wish to connect. This will display the Virtual Remote screen.
NOTE:
• When [NORMAL] is selected for [STANDBY MODE] from the menu, the projector cannot be turned on via network connection.
TIP:
• The Virtual Remote Tool screen (or Toolbar) can be displayed without displaying "Easy Setup" window.
To do so, click to place a check mark for "
on the Windows Desktop.
Do not use Easy Setup next time" on the screen.
190
8. User Supportware