Foscam FI8908 User Manual page 34

WWW.FOSCAM.COM
2) Plug an earphone or a speaker in the computer; you can hear beep sound when the light
turns red.
3) The camera will record automatically It will recording for one minute after motion trigger.
You can find the recording file in the folder which you set to store alarm record. (Figure 3.3)
4) Send mails when motion trigger.
If you want to receive images when motion trigger. You need set Mail Service Settings first.
(Figure 3.18) Then set motion alarm as follows:
If you want the camera send mails in a special time range, not all the time when motion trigger,
but only during the time you wish. You can choose Scheduler and set time range for motion
alarm. (Figure 3.28)
5) Upload images via FTP server when motion trigger.
If you want upload images to FTP server when motion trigger. You need set FTP Service
Settings first. (Figure 3.20/3.21) Then set motion alarm as below picture.
There are two ways to alarm.
1) Alarm at any time when motion trigger.
Don't choose Scheduler. The camera will alarm at any time when motion trigger.
2) Plan to alarm.
If you want the camera alarm during the time you set. You need choose Scheduler and set time
ShenZhen Foscam Intelligent Technology Co., Ltd
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
Figure 3.25
Choose it
Figure 3.26
Choose it
You can set a interval for uploading images
Figure 3.27
FI8908/FI8908W User Manual
32