Foscam FI8908 User Manual page 11

WWW.FOSCAM.COM FI8908/FI8908W User Manual
Figure 2.5
IP Address: Fill in the IP address assigned and make sure it is in the same subnet as your
computer or router. (I.e. the first three sections are the same)
Subnet Mask: The default subnet mask of the equipment in our LAN is: 255.255.255.0.You can
find the subnet mask in the basic information of your router or the locally-attached of your PC.
Gateway: Make sure it is in the same subnet with PC's IP address. Here gateway is your router's
LAN IP.
DNS Server: IP address of ISP network provider. You can find the DNS server in your router or
check the locally-attached of your computer. Locally-attached of PC contains your PC's IP
address, gateway and DNS server. Normally, there are two DNS servers. Here you can also set
the DNS server the same with gateway.
Http Port: The defult lan port is 80.You can set another port number, such as port 8005, 85,
8100.etc.
User: Default administrator user name is admin
Password: Default password is blank, no password.
NOTE: If the prompt "Subnet doesn't match, dbclick to change!" appeared, please enable DHCP
and choose obtain IP from DHCP server or set camera's IP address and gateway once again.
Upgrade Firmware
Enter the correct User and Password to upgrade system Firmware and Web UI. If you upgrade
the camera, Please upgrade system firmware first and then upgrade web UI. Or it may
damage the camera.
Please download the firmware package under the correct type of your camera before upgrade.
Follow the upgrade document in the package carefully to upgrade. Please look readme first
before you upgrade.
CAUTION: Please don't upgrade the firmware freely. Sometimes, your camera may be damaged
if operate wrong during upgrade. If your camera works well with the current firmware, we
recommend you'd better not upgrade it.
NOTE: If you download the firmware. Please check if bytes of the two .bin file are exactly the
same with the size in readme. If it fits, you can upgrade it. If not, please download the firmware
again until the bytes are exactly the same with the official size. Otherwise, your camera would be
9
ShenZhen Foscam Intelligent Technology Co., Ltd
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168