Wolf CONVECTION STEAM OVENS Use & Care Manual page 7

OVEN OPERATION
Oven Operation
OPERATING TIME
The operating time feature automatically turns the oven off
at a specified time. Oven will begin to heat immediately and
will turn off at desired switch-off time.
If the temperature probe is used, the probe will override the
switch-off time and turn the oven off when the set tempera-
ture is reached. If the probe temperature is not reached
before the switch-off time, it will not extend operating time.
Setting controls:
Select desired cooking mode and temperature.
1
Press .
2
Turn the knob to select desired operating time, then
3
press .
To adjust operating time, press and turn the knob to
select desired time, then press .
DELAYED START
The delayed start feature automatically turns the oven on
and off at specified times. Oven will remain idle until desired
start time and will turn off at desired switch-off time. Clock
must be set to the correct time for delayed start to function
properly.
If the temperature probe is used, the probe will override the
switch-off time and turn the oven off when the set tempera-
ture is reached. If the probe temperature is not reached
before the switch-off time, it will not extend operating time.
Setting controls:
Select desired cooking mode and temperature.
1
Press and turn the knob to select desired operating
2
time (do not press ).
Press and turn the knob to select desired switch-off
3
time, then press .
To adjust switch-off time, press twice and turn the knob
to select desired time, then press .
TEMPERATURE PROBE
The temperature probe measures internal temperature
of food while cooking. It can be used with all cooking
modes except Gourmet. When the temperature probe is in
use, press to alternate between the actual probe tem-
perature displayed and probe set temperature.
Setting controls:
Select desired cooking mode and temperature.
1
Place the probe in the thickest part of the food being
2
cooked, then insert the probe into the receptacle. Refer
to the illustration below.
Press twice and turn the knob to select desired
3
doneness, then press .
The probe temperature will appear on the display once it is
above 30°C. To adjust the probe temperature, press
turn the knob to desired temperature, then
press .
CAUTION
Probe and probe receptacle will be very hot. Handle
with care.
Probe receptacle.
OVEN RACK POSITION
The oven racks can be placed in any of the four positions
labeled on the right front face of the convection steam oven.
Position the oven racks so the horizontal bar is at the back
of the oven. Do not use the stainless steal pan upside down.
Refer to the illustration below. The recipes in Recipes mode
reference rack position for best results.
and
Rack position.
wolfappliance.com
|
7