Troubleshooting - Uniden BTS150 Owner's Manual

TROUBLESHOOTING

If this happens...
Disconnection due to Out of
Range
No "Beep" sound after
disconnection of A2DP HFP
Sound is not clear or there is
no sound at all
Music won't play on the
BTS150
Try this...
Move back into connection range and:
– Turn your speaker off and back on to reconnect to
your Bluetooth device.
Press for reconnection.
–
NOTE: The speaker automatically connects to the last device
connected. If you need to reconnect to the first device that
was connected, power off and back on.
Press and
successfully.
– Turn your speaker off and then back on.
– Turn off your music device's equalizer.
Check your speaker or Bluetooth device volume
–
level.
– Make sure your Bluetooth device has A2DP.
– Check if both devices are connected.
– Turn your speaker off and then back on to auto-
connect with your Bluetooth device.
to connect to A2DP & HFP
15