Uniden BTS150 Owner's Manual page 6

Pair First Bluetooth Device
Pair your first Bluetooth device to your speaker when you turn your speaker on for the first
time. Be sure your speaker is in pairing mode (see step 2-3 of 'Pair Second Bluetooth Device'
below).
1. Select a Bluetooth V2.0 device (mobile phone or music player) to pair.
2. Select the Searching mode on your Bluetooth device (refer to your Bluetooth device's
owner's manual for details if necessary).
3. Your Bluetooth device should find
necessary.
4. Verify that you are connected to your speaker. The Bluetooth LED moves to a steady ON
state when pairing is complete.
Pair Second Bluetooth Device
When you want to pair the second Bluetooth device:
1. Turn on your speaker.
2. Press and hold
3. Release . The BTS150 is ready to pair.
4. Follow the same procedures for pairing your first Bluetooth device (see above).
The Bluetooth Speaker can store pairing information for two devices but only one device can be
connected at a time. To switch between paired devices, disconnect the Bluetooth connection from the
existing device (see manual for your Bluetooth device) and then connect the second device.
6
BTS150; select it and use 0000 for a pairing code if
until your speaker beeps twice.