Troubleshooting - Uniden BTS200 User Manual

You can turn SRS on or off (default = on). This speaker retains the STS setting during power
off.
1. Press and
2. If you hear a single acknowledgement tone, you have turned SRS off. If you hear a
double acknowledgement tone, you have turned SRS back on.

TROUBLESHOOTING

If this happens...
Disconnection due to Out of
Range
No "Beep" sound after
disconnection of A2DP HFP
Sound is not clear or there is
no sound at all
Music won't play on the
BTS200
16 - English
at the same time when the music is playing.
Try this...
After back to connection range, press "Stand-by or
Phone" key for reconnection.
Press "Power & Phone" key to get connection of A2DP &
HFP successfully.
Please check BTS200 or your Bluetooth device volume
level.
– Make sure your Bluetooth device has A2DP.
– Check if both devices are connected.
– Turn your BTS200 off and then back on to auto-
connect with your Bluetooth device.