Photo Mode - Uniden iGO CAM 320 Owner's Manual

Photo Mode

•
Press the MODE button to switch to the photo mode, the
display on the top left corner of the screen.
•
Now, press the OK button to take a photo.
Press the MENU button to access the various menu settings, available under
the Photo mode. Press the relevant UP and DOWN keys to scan through the
various settings and then press OK to select.
Capture Mode
Resolution
Sequence
Quality
Sharpness
White Balance
Colour
ISO
EV (Exposure Value)
Anti-Shaking
Quick Review
Date Stamp
UNIDEN iGO CAM 320
Set the time gap for capturing an image.
For example, if you select 2s, then that will be the
delay between the OK button being pressed and
the image being captured.
Defi ne the image resolution.
The camera goes into a continuous shooting mode
when this option is activated and you get up to 5
shots in one click.
Use to defi ne the quality of the images you want to
capture.
Use to defi ne the clarity of detail in the images you
want to capture.
Establish the condition to capture an image, from
the options given.
Set the background colour for the images.
Use this setting, to increase or decrease the
sensitivity of the camera towards light.
Set the brightness sensitivity.
Activate this to reduce the camera shake and
capture a better quality image.
Set the time duration the image displays on the
screen after it has been captured.
Enable/Disable the date and time on the image
fi les.
12
icon will
Vehicle Recorder