Uniden iGO CAM 320 Owner's Manual page 11

Menu Settings
Please note, you cannot access MENU in the video mode,
when the the unit is recording. To access the Menu settings, you
will need to stop recording by pressing OK.
NOTE
Press the MENU button to access the various menu settings, available under
the Video mode. Press the relevant UP and DOWN keys to scan through the
various settings and then press OK to select.
Press the MENU button to exit the Menu mode.
Resolution
Loop Recording
EV Exposure Value
Motion Detection
Audio
Date Stamp
G Sensor
Key Tone
UNIDEN iGO CAM 320
Set the video resolution.
Use this option to set the time duration of each
video clip. If you choose the option 'Off' then the
be overwritten on the micro SD card.
Set the brightness sensitivity
Enable this setting to allow the recorder to start
recording when it detects movement.
Use this setting to turn on/off the audio
recording.
Use to display or hide the date and time on the
recordings.
case of a sudden event.
Have the keys sound a tone when you press
them.
11
Vehicle Recorder