Table of Contents
Advertisement
B. Click the "Scan for IQeye
cameras on my network" to find
IQeye cameras.
The detected cameras will be
displayed in the IQfinder window.
Select a camera from the list and
click the "Assign IP" to edit the
selected camera's IP settings.
C. The "Assign IP" window allows
the IP Address, Subnet and
Gateway of the camera to be
changed, and alternatively
the camera to be configured
for DHCP operation. Click the
"Apply" button after making the
desired changes.
Note: Changing between a static IP address and
DHCP will require the camera to be rebooted.
D. To view a camera "Double click"
on a camera entry or highlight
a camera in the list and click
the "Web Page" button. . The
"Live" page will be displayed
through your default browser
(IE recommended). It is also
possible to open Internet
Explorer and enter the IP
address of the IQeye camera in
the address field of the browser.
4. Additional Configuration
To perform further configuration
of the camera click on the
"Setup" tab.
Note: The default username is "root" and the
default password is "system".
9
Advertisement
Table of Contents
