Pendant Mount - Iqinvision IQeye Alliance-mini series Installation And Operating Instructions Manual

Table of Contents

7 IQeye Alliance-mini Pendant Mount Installation

The IQeye Alliance-mini Pendant Mount adapter is designed to easily mount the

camera via a ¾" NPT conduit (not supplied).

1. Pull the PoE Ethernet cable through the top of the Pendant Mount

and attach the Pendant Mount to the conduit by threading the pendant

cover to the conduit as shown in Image 8.1.

2. Pull the PoE Ethernet cable through the cable pass-through in the

camera base plate and connect it to the camera's Ethernet port.

3. Attach the camera base plate to the Pendant mount using the

supplied quantity. (2) machine screws.

Figure 7.1

4. Setup the camera as described in steps 3-6 in section 6.

Note: The IQeye Alliance-mini Pendant Mount does not provide a weather seal to the camera. The

IQeye Alliance-mini in all of its mounting configurations is still an interior camera.

Table of Contents