Rosen In-Dash Multi-Media System Owner's Manual page 121

•
Trip Computer
·tt.7.1 Trip Computer screen
The Trip C een provides collected trip data It can be opened from the Trip Information screen by
tapping
The fields on this screen are continuously updated while you keep the screen open
You can switch between the trips, pause then resume them, or reset their data.
You have the following functions on this screen:
Name Description
•
Pauses the trip currently shown on the screen Values on the screen stop changing
•
This button replaces the previous one if it has been activated. Tap it to resume collecting
trip data.
•
Resets all counters of the currently shown trip. Collecting trip data is restarted only when
Rosen Navigation receives a position from the GPS.
am
Cycles through all trips
,
4. t.8 Quick menu
The Quick menu is a selection of controls that are frequently needed during navigation It can be opened
directly from the Map screen by tapping
If you tap any of the switches in the Quick menu except for the Vehicle type, the Map screen immediately
returns A switch is on if its lamp is
lit The Vehicle type button is different. It is a multi-value button. It opens a
list of available choices, and the symbol of the selected vehicle is shown on the button.
Name Main function (single tap) Function (tap and hold)
IDII
If you only adjust the volume, you need to use this button Opens the Navigation menu.
to return to the Map screen.
,,'It
Mutes all sounds of Rosen Navigation Opens Sound settings,
·~-·.··-"·"fc'";··
';"c:=:::':":S:j;
~,
Switches be1'Neen the daytime and night color schemes Opens Color Profiles settings.
""5<:
manually. This will not disable the automatic switching
be1'Neen the two schemes: the other color scheme
returns at the next scheduled time.
d
3D buildings can be displayed on the map Use this Opens 3D Settings
switch to suppress them temporarily.
46