System Q; Audio Control - Kenwood KDC-MP528 Instruction Manual

General features

System Q

You can recall the best sound setting preset for
different types of music.
1
Select the source to set
Press the [SRC] button.
2
Select the Sound type
Press the [Q] button.
Each time the button is pressed, the sound
setting switches.
Sound setting
User memory
Rock
Pops
Easy
Top 40
Jazz
Natural
• User memory: The values set on the <Audio Control>
(page 10).
• Each setting value is changed with the <Speaker
Setting> (page 12).
First, select the speaker type with the Speaker setting.

Audio Control

1
Select the source for adjustment
Press the [SRC] button.
2
Enter Audio Control mode
Press the [VOL] knob.
3
Select the Basic Audio item for adjustment
Press the [VOL] knob.
Each time the knob is pressed, the items that can
be adjusted switch as shown below.
4
Adjust the Basic Audio item
Turn the [VOL] knob.
Adjustment Item Display
1
Rear Volume * "R-VOL"
2,3,4
Subwoofer level* "SW L"
Bass level* 5,6 "BAS L"
5,6
Middle level* "MID L"
Treble level* 5,6 "TRE L"
Balance "BAL"
10
|
English
Display
"USER"
"ROCK"
"POPS"
"EASY"
"TOP40"
"JAZZ"
"NATURAL"
Range
0 — 35
–15 — +15
–8 — +8
–8 — +8
–8 — +8
Left 15 — Right 15
4
Fader* "FAD"
Exit Audio Control mode
1
• * You can control this item when "2ZON" of <Audio
Setup> (page 11) is set to "ON".
2
• * You can control this item when <Switching preout>
(page 25) is set to "SWPRE SW". (KDC-MP5028/
MP528 only)
3
• * You can control this item when <Subwoofer
Output> (page 11) is set to "SW ON".
4
• * You can control this item when "2ZON" of <Audio
Setup> (page 11) is set to "OFF".
5
• * These items can be adjusted in detail by the
following methods. (Function of the KDC-X589)
• * 6 Source tone memory: The set up value is put in the
memory per source. (Detail Audio item is included)
5
Exit Audio Control mode
Press any button.
Press the button which is not [VOL] knob and
[ATT]/ [ANG] button.
Adjust the detail of Audio Control
1 Select the Audio item for adjustment
By referring to the step 1 — 3 above, select the
desired item to be set in detail from the items
marked with * 5 .
2 Enter Detail adjustment mode of Audio
Control
Press the [VOL] knob for at least 1 second.
3 Select the Detail Audio item for adjustment
Press the [VOL] knob.
Each time the knob is pressed, the items that
can be adjusted switch as shown below.
4 Adjust the Detail Audio item
Turn the [VOL] knob.
Bass level
Adjustment Item Display
Bass Center Frequency "BAS F"
Bass Q Factor "BAS Q"
Bass Extend "B EX"
Middle level
Adjustment Item Display
Middle Center Frequency "MID F"
Middle Q Factor "MID Q"
Treble level
Adjustment Item Display
Treble Center Frequency "TRE"
Rear 15 — Front 15
Range
40/50/60/70/80/100/
120/150 Hz
1.00/1.25/1.50/2.00
OFF/ON
Range
0.5/1.0/1.5/2.0 kHz
1.0/2.0
Range
10.0/12.5/15.0/17.5 kHz