General features
Loudness
Compensating for low and high tones during low
volume.
Press the [LOUD] button for at least 1 second.
Each time the button is pressed for at least 1
second the Loudness turns ON or OFF.
When it's ON, "LOUD" indicator is ON.
System Q
You can recall the best sound setting preset for
different types of music.
1
Select the source to set
Press the [SRC] button.
2
Select the Sound type
Press the [Q] button.
Each time the button is pressed the sound
setting switches.
Sound setting
Flat
Rock
Top 40
Pops
Jazz
Easy
• Each setting value is changed with the 'Speaker
Setting' (page 10).
First, select the speaker type with the Speaker setting.
Audio Control
1
Select the source for adjustment
Press the [SRC] button.
2
Enter Audio Control mode
Press the [AUD] button for at least 1 second.
3
Select the Audio item for adjustment
Press the [FM] or [AM] button.
Each time the button is pressed the items that
can be adjusted switch as shown below.
4
Adjust the Audio item
Press the [4] or [¢] button.
10
|
English
Adjustment Item
Bass level
Middle level
Treble level
Balance
Fader
5
Exit Audio Control mode
Press the [AUD] button.
Speaker Setting
Fine-tuning so that the System Q value is optimal
when setting the speaker type.
1
Enter Standby
Press the [SRC] button.
Display
Select the "STANDBY" display.
"FLAT"
"ROCK"
2
Enter Speaker Setting mode
"TOP40"
Press the [Q] button.
"POPS"
3
Select the Speaker type
"JAZZ"
Press the [4] or [¢] button.
"EASY"
Each time the button is pressed the setting
switches as shown below.
Speaker type
OFF
For the OEM speaker
For 6 & 6x9 in. speaker
For 5 & 4 in. speaker
4
Exit Speaker Setting mode
Press the [Q] button.
Display
Range
"BAS"
–8 — +8
"MID"
–8 — +8
"TRE"
–8 — +8
"BAL"
Left 15 — Right 15
"FAD"
Rear 15 — Front 15
Display
"SP OFF"
"SP OEM"
"SP 6/6x9"
"SP 5/4"