Attenuator; Loudness; Audio Control Setting - Kenwood KDC-303RG Instruction Manual

General features

Attenuator

This function allows you to turn down the volume quickly.
Turning Attenuator On/Off:
Press the ATT button to switch the attenuator on and off.
When the attenuator is on, the ATT indicator blinks.
When the attenuator is off, the volume returns to the original
level.
NOTE
Turning the volume up, or turning it all the way down deactivates
the attenuator function.

Loudness

This function amplifies low and high tones when the volume is
turned down.
The LOUD indicator lights up, when the loudness function is
on.
Turning Loudness On/Off:
Hold down the LOUD button for one second or more to switch
the loudness on and off.

Audio Control Setting

Adjust various parameters of sound quality.
1
Press the AUD button to enter the control mode.
2
Selecting mode
Press either the FM or AM button.
Each time the button is pressed, the adjustment mode will
change.
Please refer to the following for the contents of the adjustment
modes.
NOTE
Source tone memory
Each source (CD, FM, AM, and disc changer) has its own memory
in which to store the bass and treble tone settings.
The settings made for a particular source are then recalled
automatically whenever you use that source (e.g., FM mode uses
the tone settings made for FM, AM for AM, etc.).
3
Adjust each mode
Press the 4/¢ button.
Please refer to the following for the adjusting values.
4
Press the AUD button to end the control mode.
"dB": Recalling the kenwood preset sound setting
Press the preset buttons (#1-5).
Settings: #1;FLAT, #2;ROCK, #3;POPS, #4;JAZZ, #5;EASY
NOTE
You can call the following settings with this function; bass centre
frequency, bass level, bass quality factor, bass extension, treble
centre frequency, and treble level setting.
"BAS": Adjust the bass level.
Setting values: - 8 - + 8
"TRE": Adjust the treble level.
Setting values: - 8 - + 8
"BAL": Adjust the balance level.
Setting values: Left 15 - Right 15
— 8 —