Switching Modes; Loudness; Audio Control Setting - Kenwood KDC-215S Instruction Manual

General features

Switching Modes

Switching Modes:
Each time you press the SRC (source) button, the mode
switches as follows:
M
Tuner mode
M
CD mode
M
External disc control mode 1
(KDC-4015/415S/315V/315S/35MR only)
M
External disc control mode 2/AUX mode
(KDC-4015/415S/315V/315S/35MR only)
M
Standby mode
Selecting standby mode:
Press the SRC button repeatedly and switch to "OFF"
When "OFF" is displayed, the standby mode is activated.
The standby mode turns all functions off while leaving the
power to the unit on. Use this mode when you want to have
the display illuminated but don't want to listen to anything.
NOTE
• The mode switches to the next mode from any mode which
cannot be used.
• The external disc control mode will differ depending on the unit
that is connected.
• The AUX mode is available only when the changer / AUX
switching adapter (KCA-S210A or CA-C1AX) or CD changer
(KDC-CPS85, KDC-CX85, KDC-CPS82 or KDC-CX82) is
connected to this unit.
During the AUX mode, "AVin" will show in the display.
When the CA-C1AX is being used, the AUX Mode will replace
the External Disc Control Mode.

Loudness

This function amplifies low and high tones when the volume is
turned down.
The LOUD indicator lights up when the loudness function is on.
Turning Loudness On/Off:
Press the LOUD button for at least one second to switch the
loudness on and off.

Audio Control Setting

Adjust various parameters of sound quality.
1
Press the A.ADJ button for at least one second to enter the
control mode.
2
Selecting mode
Press either the FM or AM button.
Each time the button is pressed, the adjustment mode will
change.
Please refer to the following for the contents of the adjustment
modes.
NOTE
Source tone memory
Each source ( CD, FM, AM and disc changer ) has its own
memory in which to store the bass and treble tone settings.
The settings made for a particular source are recalled
automatically whenever you use that source ( for example, FM
mode uses the tone settings made for FM, AM for AM, etc.).
3
Adjust each mode
Press the 4/¢ button.
Please refer to the following for the adjusting values.
4
Press the A.ADJ button to end the control mode.
"BAS": Adjust the bass level.
Setting values: - 8 - + 8
— 8 —