Loudness; Faceplate Angle Adjustment; Switching Full-Screen Display; Switching The Upper Part Display - Kenwood KDC-8090R Instruction Manual

General features

Loudness

This function amplifies low and high tones when the volume is
turned down.
The LOUD indicator lights up, when the loudness function is
on.
Turning Loudness On/Off:
Hold down the LOUD button for one second or more to switch
the loudness on and off.
NOTE
The loudness function does not affect non-fading pre-out.

Faceplate Angle Adjustment

You can adjust the faceplate angle for easy viewing.
Sliding the faceplate:
Hold down the ANG button for one second or more.
NOTE
Do not apply excessive force to the faceplate under setting 2.

Switching Full-Screen Display

This function switches the type of information on the display
in the full screen display mode.
Each time you press the CLK button, the full screen display
changes as follows:
In Source mode:
Demonstration
Spectrum Analyzer 1
Spectrum Analyzer 2
Spectrum Analyzer 3
Spectrum Analyzer 4 (KDC-PS9590R/9090R)/
Each source display+ Graphic (KDC-8090R)
In Stand by mode:
Demonstration
Date + Clock + Function indicator
"ALL OFF"
NOTE
Please see the menu settings about selecting the display mode.
For details refer to the Switching Display Mode page for the
menu settings. (page 37)

Switching the Upper Part Display

This function switches the type of information on the upper
part display when the display mode is in vertical division
display.
— 10 —