Text Scroll; Cd Read Setting; Built-In Auxiliary Input Setting; Switches The Ntsc/Pal Setting - Kenwood KDC-MP4026V Instruction Manual

Menu system

Text Scroll

Setting the displayed text scroll.
Display Setting
"SCL AUTO" Repeats scroll.
"SCL MANU" Scrolls when the display changes.
• The text scrolled is shown below.
- CD text
- Folder name/ File name/ Song title/ Artist name/
Album name
- MD title
In Standby mode

CD Read Setting

When there is a problem on playing a CD with
special format, this setting play the CD by force.
Display
"CD READ1"
"CD READ2"
• Setting "CD READ2" cannot play MP3/WMA.
Some music CDs may not be played back even in the
"CD READ2" mode.
In Standby mode

Built-in Auxiliary input Setting

Set the Built-in Auxiliary Input function.
Display Setting
"AUX OFF" When selecting the source there's no Auxiliary Input.
"AUX ON" When selecting the source there's Auxiliary Input.
In Standby mode

Switches the NTSC/PAL setting

Switches to the NTSC broadcast mode or PAL
broadcast mode setting.
Display Setting
"PAL" Set this in the PAL broadcast mode area.
"NTSC" Set this in the NTSC broadcast mode area.
20
|
English
Setting
Play CD and MP3/WMA.
Play CD by force.
• The PAL or NTSC setup must match the setup of the
connected monitor unit. If they do not match, no
image can be played back.