System Components - Sony XCG-V60E Technical Manual

System Components

The Camera Module system comprises the following optional products (sold separately from the Camera Module).
Camera Module
CCXC-12P02N (2 m, 6.6 ft)/
05N (5 m, 16.4 ft)/10N (10 m,
32.8 ft)/25N (25 m, 82 ft)
camera cable
C-mount lens
High-resolution lens
DC-700/700CE
camera adaptor
VCT-ST70I
tripod adaptor
Network card
(commercially available)
LAN cable
(commercially available)
This is a small-size, high-resolution, video camera module using a progressive scan CCD image
sensor.
This is attached to the DC IN connector of the camera module and is used for power supply and
exchange of trigger signals.
Use a high-resolution lens.
This is connected to the camera module to enable power supply from ordinary AC power source.
This attaches to the bottom of the camera module to fix the camera module to a tripod.
Install the board in the expansion slot of the host device (ex: computer). Select a card that is
appropriate for your system and that supports 1000BASE-T and jumbo packets.
This cable connects to the RJ45 connector on the rear panel of the camera module. Image/control
signals are transmitted via this cable. Select a LAN cable that supports 1000BASE-T (CAT5e or
higher cable standard).
Depending on the attributes of the LAN cable, images may become less clear and the camera
module may become unstable. Be sure to use a LAN cable that has sufficient noise reduction.
5