Permobil chairman Owner's Manual page 18

Owner´s manual Chairman
Leverman
(Joystick manager)
With the help of the Leverman, you can use
the joystick to control the speed of the chair
(5 positions), seat lift, backrest angle, seat
angle and leg support. These are all the
functions that are normally controlled from
the push-buttons on the seat control panel.
Operating the Leverman
1. Switch the start button on the control
panel.
2. Press the MODE button. The battery indi-
cator lights and the speed selector lights
flash. Step the speed range up or down
by moving the joystick right or left.
3. Press MODE to move through the pro-
gram. The right foot-plate lights. Now you
can move the leg support out or in by
moving the joystick forwards or backwards.
4. Move the joystick to the right once and
the seat lamp will come on. Moving the
joystick forwards or backwards will raise
or lower the height of the seat.
5. Move the joystick to the right and both the
seat and backrest lamps light. This
means that seat adjustment is active, and
can be controlled by moving the joystick
forwards or backwards.
6. Move the joystick to the right and the
backrest lamp comes on. The backrest
angle is stepless, and is adjusted by
moving the joystick forwards or back-
wards.
7. Press the MODE button again. The pro-
gram ends and the chair is ready to drive.
- 18-
Design and Function
Fig. 22. Leg support
active
Fig. 23. Seat lift
Fig. 24. Seat tilt
Fig. 25. Backrest angle