Basic Functions
Explain how to reset and register / delete the password, fingerprint and remote
controller. In addition, instruct how to open / close a door.
How to reset the system
(Password/Fingerprint/Remote Controller)
After the system reset, all information of previous password, fingerprint and remote
controller registration will be erased and the password will be set '1234' ( factory default ).
Register new password before starting the system.
1.
Opening the cover (from indoor)
2. Press [Password] & [Fingerprint] button (from indoor)
3. Enter password (from outside)
18
Remove the battery cover mounting screw in
anti-clockwise and lift up the battery cover.
Press [Password] button and [Fingerprint]
button simultaneously for five (5) seconds.
- Success: Beep Beep
Enter current password or '4560852580' and
then press [ ] button.
- Success: Cheerful tune
- Failure: Beep~