Basic Functions; Initialization (Password And Rf Card) - Samsung EZON SHS-1320 User Manual

Basic Functions

This section describes the ways to initialize the information registered in the door lock, to
register the password and card data, and to open or close the door.

Initialization (Password and RF Card)

All registered data (password and RF card) are deleted. After initialization, the
password is set to '12345', and the registered card are erased.
Initialization is available while the door is open.
1. Opening the Cover (from inside)
2. Pressing the [Registration] Button (from inside)
3. Entering the Password (from outside)
Lightly press the battery cover and pull it
down in the direction of the arrow mark.
Press and hold the
10 seconds or longer.
- Successful: "Toot-->Toot, toot-->Toot, toot, toot, toot'
sounds are generated.
Press the registered password, or
'4560852580', and then press the [ ] button.
- Successful: "Too~~~t" sound is generated.
- Failed: "Toot~" sound is generated.
for
[Registration] button
11