Basic Functions; Initialization (Password, Card, Key Tag And Remote Controller) - Samsung Ezon SHS-5120XM series User Manual

Basic Functions

This section describes the ways to initialize the information registered in the door lock, to
register the password and card data, and to open or close the door.
Initialization (Password, Card, Key Tag
and Remote Controller)
All registered data (password, card and key tag) are deleted. After
initialization, the password is set to '12345', and the registered card and key
tag data are erased.
- After initializing the registered data, reregister the card and password.
- Initialization is available while the door is open.
- The registered HA device data can not be deleted.
1. Opening the Cover (from inside)
2. Pressing the [Password] Button (from inside)
3. Entering the Password (from outside)
Lightly press the battery cover and push it up,
as shown in the diagram.
Press and hold the [Password] button for 5
seconds or longer.
- Successful: "Toot Toot, toot" sounds are generated.
Press the registered password, or
'4560852580' then press the [ ] button.
- Successful: "Too~~~t" sound is generated.
- Failed: "Toot~" sound is generated.
17