No.
Part
1
Battery cover
mounting screw
2
Battery cover
3
Antenna
4
L-shaped wrench
storage
5
Remote button
6
Fingerprint button
7
Password button
8
Open button
9
Interior handlebar
Mortise
No.
Part
1
Dead bolt
2
Latch bolt
3
Automatic lock
sensor
Hold the battery cover from the main body.
Protect the batteries and registry buttons.
For wireless home network communication (when it is used with H/A
or H/N devices).
Store the L-shaped wrench to fasten or loosen the exterior
handlebar mounting screws.
Press this button to register / delete the remote controller.
Press this button to register / delete the fingerprint information.
Press this button to change password.
Lock/Unlock the door from the inside / set internal forced lock
Pull down the interior handlebar to open the door
Lock the door on the door frame
Hold the door on the door frame
Detect whether the door is open or closed (on the automatic lock
mode only)
Function
Dead bolt
Latch bolt
Automatic lock sensor
Function
13