Advertisement
5. Unselect the checkbox labelled "Automatically configure my mobile broadband".
6. Type in the APN required for your service (e.g telstra.corp), or select from the "Choose an
APN here" pull down menu.
7. Enter the Username and Password as supplied by Telstra.
8. Select "Disable" for the NAT Masquerading option*.
9. Click the "Save" button located under the NAT Masquerading option to store the new
configuration settings and connect to the Telstra IPWAN Mobile Broadband service.
*
Enabling/disabling NAT Masquerading is dependent on your individual network setup
Advertisement
