Installation - Toshiba RAV-SM1103DT-A Installation Manual

Concealed duct high static pressure type
Hide thumbs Also See for RAV-SM1103DT-A:
Table of Contents

Advertisement

Concealed Duct High Static Pressure
4

INSTALLATION

• Install the air conditioner certainly to sufficiently withstand the weight.
• If the strength is insufficient, the unit may fall down resulting in human injury.
• Perform a specified installation work to guard against strong wind or earthquake.
• An incomplete installation can cause accidents by the units falling and dropping.
REQUIREMENT
Strictly comply with the following rules to prevent damage of the indoor units and human injury.
• Do not put a heavy article on the indoor unit. (Even units are packaged)
• Carry in the indoor unit as it is packaged if possible. If carrying in the indoor unit unpacked by
necessity, be sure to use buffering cloth, etc. to not damage the unit.
• To move the indoor unit, hold the hooking metals (4 positions) only.
Do not apply force to the other parts (refrigerant pipe, drain pan, foamed parts, or resin parts, etc.).
• Hanging bolt pitch of air inlet chamber side is different (center position), make sure not to make
mistake to install the setting direction.
• Carry the package by two or more persons, and do not bundle it with plastic band at positions other
than specified.
7-EN
WARNING
– 7 –
Installation Manual

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rav-sm1403dt-aRav-sm1603dt-a

Table of Contents