Toshiba RAV-SM1103DT-A Installation Manual page 27

Concealed Duct High Static Pressure
How to set up power
saving mode
1. Push button for at least four seconds
when the air conditioner is not working.
flashes.
Indicates CODE No. "C2."
2. Select an indoor unit to be set by pushing
(left side of the button).
Each time you push the button, unit numbers
change as follows:
Unit No.
1-1
The fan of the selected unit runs.
3. Adjust the power save setting by pushing TIME
buttons.
Each push of the button changes the power
level by 1% within the range from 100% to 50%.
* The factory setting is 75%.
• This indication may not be true for types other
than 4-series outdoor unit. (Super Digital
Inverter)
4. Determine the setting by pushing
5. Push button to complete the setting.
Unit No. Unit No.
1-2 1-3
Unit No.
1-4
Setting of power level in
power saving mode
button.
– 26 –
Installation Manual
EN
26-EN