Aux-In Mode; Cleaning And Maintenance; Technical Information - Sanyo DMP-P1 Instruction Manual

AUX-IN MODE

Connect the Audio Output jacks of your auxiliary sound source (TV, VCR, DVD Player,
Cassette Deck, Mini Disc player, etc., etc.,) to the AUX IN jack on the back panel of the unit.
The auxiliary function will only activate when the aux in jack is fitted with connection
cable.
Note: The connection cables are not included.
1. Press STANDBY/ON/FUNCTION button to select AUX mode.
2. Plug-in one end of the Aux Line Cord into the AUX IN socket located
at the back of the unit and the other end to the headphone jack of
the music device.
3. Devices connected via AUX IN can only be controlled via the devices' controls.
4. The volume level can be adjusted by pressing the VOL +/- button or adjust the volume
level on the external music device.

CLEANING AND MAINTENANCE

1. If the cabinet becomes dusty, wipe it with a soft cloth.
2. If the cabinet becomes dirty, clean it with a soft, slightly dampened cloth.
3. Never allow water or any liquid to get inside the cabinet.
4. Never use any abrasive cleaners or cleaning pads as these will damage the finish of your
unit.

TECHNICAL INFORMATION

AC Adaptor Input :
Output :
AM :
FM :
DC Backup :
Unit Output Power :
Power Consumption :
240 V ~ 50 Hz
9V~1200 mA
522 - 1620 kHz
87.5 - 108 MHz
3V (2 x "AAA" Size Batteries)
2 x 1 Watts RMS
11 W
13