Preparation For Use - Sanyo DMP-P1 Instruction Manual

PREPARATION FOR USE

Before Setting Up The Unit
• Operate controls and switches as described in the manual.
• Before turning on the power, make certain that the power cord is properly installed.
• When moving the unit, be sure to first disconnect the AC power cord.
• Avoid installing this unit in places exposed to direct sunlight or close to heat radiating
appliances such as electric heaters, on top of other stereo equipment that radiates too
much heat, places lacking ventilation or dusty areas, places subject to constant vibration
and/or humid or moist areas.
Unpacking And Setting Up
• Remove the product from the carton and remove all packing material from the unit. We
suggest that you save the packing material, if possible, in the unlikely event that your unit
ever needs to be returned for service. The original carton and packing material is the only
safe way to pack your product to protect it from damage in transit.
• Remove any descriptive labels or stickers on the front or top of the cabinet. Do not remove
any labels or stickers from the back or bottom of the cabinet.
• Place your unit on a level surface such as a table, desk or shelf, convenient to an AC
outlet, out of direct sunlight, and away from sources of excess heat, dirt, dust, moisture,
humidity, or vibration.
• Unwind the FM antenna and extend it to its full length. It must be fully extended to provide
the best FM reception.
Protect Your Furniture
This model is equipped with non-skid rubber 'feet' at the bottom of the unit to prevent the
product from moving when you operate the controls. These 'feet' are made from non-migrating
rubber material specially formulated to avoid leaving any marks or stains on your furniture.
However certain types of oil based furniture polishes, wood preservatives, or cleaning sprays
may cause the rubber 'feet' to soften, and leave marks or a rubber residue on the furniture. To
prevent any damage to your furniture we strongly recommend that you purchase small
self-adhesive felt pads, available at hardware stores and home improvement centers
everywhere, and apply these pads to the bottom of the rubber 'feet' before you place the
product on fine wooden furniture.
5